Glue for Tarkett linoleum: characteristics, application

31.08.2019 House, Repair
Glue for Tarkett linoleum: characteristics, application

Glue for Tarkett linoleum is one of the most reliable, budgetary and affordable methods of fixing this popular flooring. There are many varieties of linoleum that differ in thickness, stiffness and other important characteristics. For each type, it is necessary to choose the appropriate type of glue that will satisfy all needs. A huge selection of different types of glue for Tarkett linoleum can confuse an inexperienced buyer, but this is only at first glance. For each type of floor covering there is a suitable type of fastening. It is also important to consider the features of the room where linoleum will be laid.

Types of glue and its features

The characteristics of the adhesive for flooring are determined not only by the manufacturer. You must also consider the type of material that you plan to stack. Depending on the type of linoleum, the adhesive is divided into the following types:

  • for coating with a natural base;
  • with an antistatic substrate;
  • for semi-commercial linoleum;
  • for single-layer linoleum, it is also called homogeneous;
  • for commercial;
  • on a concrete floor.

Buyers should be careful, gaining glue in the cold season. Staying in the cold during transport or storage can degrade consumer properties. Special additives are included in some types of glue for Tarkett linoleum, due to which the composition becomes frost-resistant. This species does not lose its excellent qualities even in the most severe conditions.

Composition of glue

In addition to the type of floor and the materials that make up the flooring, the composition of the adhesive must be taken into account. It is not difficult to do this if you study the instruction: it contains a list of significant conditions. The composition of the adhesive for Tarkett linoleum may be:

  • dispersion, that is, based on water;
  • based on epoxy resin and polyurethane, which, when mixed, enter into a chemical reaction and provide reliable bonding.

Often linoleum, made without a base or with a fabric base, is placed on coumaron-rubber glue. This composition is explosive, so all work should be carried out exclusively by professional builders with experience in similar activities.

Alkyd and polyvinyl chloride coatings can be glued using special bitumen mastic. The most safe is acrylic adhesive, but it is not suitable for all types of floors and coatings.

Linoleum in the kitchen

Choosing the right glue, you should focus on linoleum and floor types. The glue composition for different materials is significantly different, therefore, for reliable bonding it is necessary to achieve compliance with all parameters.

Advantages of glue for Tarkett linoleum

Important advantages of glue from this brand include:

  • excellent moisture resistance;
  • frost resistance;
  • lack of toxic components;
  • quick drying;
  • reliable fixing linoleum on the floor.

This adhesive is effective when you want to glue structured surfaces.

Surface types

The surface of the floor on which you plan to lay linoleum, may have moisture-absorbing properties. These characteristics have concrete, cement, wood. Metal, polymer screed and some other types of water do not absorb. Depending on the parameters of the base, you should choose different types of glue. In rooms where the floor area exceeds 20 square meters. m, glue should be used over the entire surface to prevent wrinkling. This should also be done in areas where traffic is high.

Methods for gluing paintings

Lay linoleum and fix it with glue is not difficult. You should remember only one main point: the canvas should lie evenly, and under it there should be no accumulation of air, otherwise the finished floor will begin to bubble and puff. Using Tarkett glue for linoleum joints, it is easy to fasten the seam of individual paintings. If the room is spacious, then one panel can not do. Also in this case, you should familiarize yourself with modern technologies of this type of work.

Laying linoleum

When laying Tarkett linoleum on a concrete floor, the adhesive may not be used. Joints can be hot welded. The master uses a building hair dryer with a special nozzle and forms paths into which the welding cord is then laid. This method of fixing the paintings requires additional attention: the cord should be from the same collection as linoleum, or match the color as closely as possible. When exposed to high temperature, the cord melts and fixes securely in the track, fastening both sheets tightly.

Stone imitation linoleum

For joining joints often another method is also used: the so-called cold welding. Glue for semi-commercial Tarkett linoleum is used for such an operation. Other linoleum types with a soft texture can also be fastened in this way. You can connect the linens of the new linoleum or glue the old exfoliated coating.

Features of bonding linoleum with antistatic properties

Antistatic linoleum is a special coating that has the ability to neutralize the accumulated static electricity. It occurs when walking, rubbing furniture on the floor, turning on a large number of computer and office equipment. For most types of Tarkett antistatic linoleum the glue will need the most usual. However, for a special finely dispersible and finely conductive coating, a special adhesive is required. To choose the right option, the buyer should carefully read the instructions on the package.

source

Comments

Tips from iHow

do not miss new and useful recommendations from experts

NEW
  • DIY magnetic stirrer: description, required materials
  • A magnetic stirrer is necessary for those who like to do various chemical experiments. With the help of this device, various ideas can be translated ...

  • Homemade hiking: interesting ideas
  • How to disconnect neodymium magnets without a special tool at home?
  • Do-it-yourself grate: materials, design, stages of work
  • Valve expander. How to do it yourself
  • shares