How to clean a kettle from a stainless steel outside: ways, means, instructions

02.09.2019 DIY, House
How to clean a kettle from a stainless steel outside: ways, means, instructions

Stainless steel utensils are very beautiful and durable to use, but it’s quite difficult to care for them. During operation, rust forms on it, which is not so easy to remove. In addition, over time, fatty deposits and other contaminants appear, which further complicate the care. But not everything is as bad as it might seem at first glance. There are several ways that will allow you to return your kitchen equipment to its former attractive appearance. Let's find out how to clean a kettle from a stainless steel inside and out, so that it always delights the eye with its characteristic brilliance. All the methods described are time-tested and have shown their effectiveness, so you can safely use them.

What equipment will be needed

ways to clean the kettle

Let's dwell on this in more detail. Cleaning a stainless steel kettle is a very time-consuming task, requiring not only some knowledge, but also certain improvised means. To effectively deal with various contaminants, you will need the following items:

  • dishwashing sponge with a soft and hard side;
  • rubber gloves;
  • container for water;
  • means for cleaning.

With regard to the last paragraph, you can use not only purchased chemistry, but also improvised means, which certainly are in every person’s house . Which ones will be described later. It is also worth noting that you should not use metal sponges, because you only scratch stainless steel with it and it will not look much better than dirty dishes. You can work with this material only with soft washcloths or a rag made of dense material.

Sodium carbonate

use soda and vinegar

The use of soda ash at home will eliminate even the most difficult pollution, not only from the dishes, but also from the stove. At the same time, unlike household chemicals, it is safe for health and costs much less. If you don’t have technical soda, then you can replace it with ordinary baking soda, which no one doubts the cleaning properties of.

The kettle is preheated on fire, then put into the sink, sprinkled with soda and cleaning starts. It should be noted right away that it will take a long time to rub. However, the time and effort expended will fully justify itself. The dishes will get their original shine, as if it had just been bought in a store. When all the dirt has been removed, it is rinsed with warm water.

How to clean the kettle from the stainless steel outside? There is one more option. Pour water into a large iron container and add 1 tbsp. l soda for every liter of water. Put the dishes in the solution, bring to a boil and leave for half an hour. Next, let the kettle cool and just wipe it with a piece of dense cloth. You will be pleasantly surprised how easy the dirt will be to wipe.

Using soda and vinegar

In this way, many housewives for several decades have used not only to clean dishes, but also to implement many other household needs, for example, to eliminate clogging in the kitchen drain. And this is far from the only area of ​​their application.

If you do not know how to clean the kettle from stainless steel of fat and scale, then try to use the ingredients that are in every kitchen. So what is required. Plain baking soda and vinegar. These simple, at first glance, components have a magical effect. How to use them correctly? Collect water into a boil-out or other metal container with a large volume, add three tablespoons of sodium bicarbonate and vinegar to it, bring to a boil, then lower the kettle and leave it for 5 minutes. Next, remove from heat and let the water cool. You can remove dirt and hard deposits with a hard sponge.

Citric acid

how to clean the kettle from the stainless steel outside

How to clean a stainless steel kettle from the outside using improvised means? Another good way is citric acid. Two bags of powder are diluted in three liters of water, after which it is poured into a kettle and brought to a boil. Ten minutes will be enough to completely get rid of the scum inside the vessel. Instead of powder, you can use lime juice. The algorithm of actions is completely identical.

Toothpaste

If you could not find soda and citric acid, then that's okay. There are many other options that will allow you to clean the stainless steel. One of those is toothpaste, which every home definitely has. This method is good in that it is environmentally friendly and safe, but at the same time no less effective. Its essence is as follows:

  1. Apply toothpaste to a hard kitchen sponge and thoroughly clean the outside of the kettle.
  2. Rinse it under running water.
  3. Polish the stainless steel with an ordinary dry piece. matter.

It is worth noting that it is not recommended to use toothpastes designed for tooth whitening. They contain abrasive substances that can lead to spoilage of the metal and the formation of scratches on it, which will no longer be possible to get rid of.

Household chemicals

Industrial products designed to combat scale, grease and rust, will allow you to quickly and with minimal physical cost to remove even old pollution. Today, the market offers a huge assortment of various household chemicals, but the most popular is Bagi Shumanit. It is applied to a metal surface and left for 10-15 minutes, after which the kitchen utensils are washed with a hard sponge and rinsed several times with water. At the final stage, to give a characteristic shine, the dishes are polished with a towel. However, it is worth considering the fact that the product is dangerous to health and can cause severe allergies if it comes into contact with the skin, so you should work with it in personal protective equipment.

Non-standard methods

Let's dwell on this aspect in more detail. It was described in detail above how to clean the kettle from the top from stainless steel. However, there are several more original methods that can be used to care for metal utensils. For example, some housewives struggle with plaque and fat with the help of cucumber pickle. The utensil boils in it, after which it rinses in warm water.

Another option is everyone’s favorite Coca Cola soda. For external cleaning, a kettle should be boiled in it, and for internal cleaning, simply pour overnight. Due to its sweet composition, water well corrodes not only fat deposits, but also strong scale.

And the last non-standard method is mustard powder. The dishes are preheated slightly, after which seasoning is applied to it and wiped with a damp sponge. As soon as pollution is eliminated, the kettle is rinsed under running water. This option is not inferior in its effectiveness to some chemicals, however, it is safe and harmless.

How to bring back burned metal utensils to life

how to clean the kettle from the stainless steel top

So, we have examined in detail how clean the kettle from the stainless steel outside. You yourself were able to make sure that there is nothing complicated. But if you forgot metal utensils on fire, as a result of which it burned out, then it will not be so simple to restore its aesthetic appearance. According to experts and experienced housewives, to eliminate soot, you can use:

  • coarse salt;
  • detergent;
  • washing powder;
  • specialized cleaning products.

However, you must use one thing. When combining various elements, you can achieve the completely opposite effect, as a result of which it will be impossible to save the dishes. The easiest and fastest way to get rid of soot is to soak the kettle in water with diluted washing powder or any dishwashing detergent. It is very difficult to say how long you have to wait. It all depends on the degree of pollution. As soon as the dirt softens a little, the metal is washed with wet salt and rinsed under running water.

It is worth noting that the principle of using all products is the same, so no matter what you use to clean stainless steel, all work should be carried out in an identical pattern. The main thing is to use only one of them, since the combination can lead to undesirable chemical reactions.

Conclusion

Here are actually all the methods of cleaning stainless steel from various types of contaminants. They are universal, therefore they can be used for leaving with many other types of working surfaces. Which one to choose, each decides for himself individually. We hope that they will be useful to you, and with their help you can restore the perfect order in your kitchen.

source

Comments

Tips from iHow

do not miss new and useful recommendations from experts

NEW
  • DIY magnetic stirrer: description, required materials
  • A magnetic stirrer is necessary for those who like to do various chemical experiments. With the help of this device, various ideas can be translated ...

  • Valve expander. How to do it yourself
  • How to make a coil for an extension cord with your own hands at home?
  • How to reduce silicone phone case: practical tips
  • Homemade hiking: interesting ideas
  • shares