Threshold in the bathroom: is it necessary, choice of options and self-decoration

31.08.2019 House, Repair
Threshold in the bathroom: is it necessary, choice of options and self-decoration

During the repair, many apartment owners are wondering if they need a threshold in the bathroom. Most believe that in this part of the room it is not particularly necessary. If you also faced a similar question, then you should know that a nut should be required.

setting the threshold in the bathroom

Its availability prescribed in sanitary norms and rules. Before you start making the threshold, you need to figure out which materials are best used and which design to choose.

Do I need a threshold

threshold in the bathroom

If you still have not decided whether to make a threshold between the bathroom and the corridor, you should know that such an elevation is necessary. Sometimes, as a result of repairs, the floor level can become equal, and the neighboring rooms are in the same plane. Sometimes BTI does not agree on such changes. You can not worry about the official permission for such a redevelopment if you do not plan to sell the apartment. But life circumstances can change, and sometimes the owners have a desire to sell an apartment and acquire new housing. Therefore, in the repair process, it is better to be guided by generally accepted rules prescribed in regulatory documents. This will eliminate the problems with the design of redevelopment.

When a leak occurs, the threshold can stop or temporarily delay the flow of water, eliminating flooding of the entire apartment. Therefore, thinking about the question of whether to set the threshold in the bathroom, you should get a positive answer and supplement this part of the room with effective waterproofing. Such works include protecting the bottom of the walls 15 cm up.

do I need a threshold in the bathroom

The main purpose of the threshold is the spill warning water in the apartment. There is a difference between doors that have thresholds or are devoid of them. In the first case, the canvas can be closed as tightly as possible. This will create additional sound insulation. Another advantage of having a threshold is that dust, drafts and unpleasant odors cannot penetrate into the bathroom, as well as leaving this room.

If you still think whether to make a threshold in the bathroom, You can use an alternative solution. You can make a difference between the floor height in the corridor and the bathroom. The floor in the corridor can be 2 cm higher. Instead of the threshold, you can make the floor with a smooth slope towards the bathroom. For all these options, more money, labor and time costs will be required than when installing a full-fledged interior door threshold. The latter solution will become more accessible and easier. This is especially true for those owners who do not have building skills.

Choice of options

Before you do threshold in the bathroom, you have to pick up the material. It may be steel - the most durable solution. It is almost impossible to damage such a threshold. Steel sills can have different shades. Stainless steel thresholds are quite infrequent. Such steel has a beautiful coating, so it is often used to finish furniture and walls. The bronze threshold will be quite expensive, so such products are made only on order. Brass products also have a high cost, but they look attractive. Such thresholds have high strength and long life.

Aluminum thresholds, which have a wide color gamut, are inexpensive. The most common wooden thresholds to the bathroom, as they are easier to process, look attractive, in addition, they are easy to pick up for a certain style of room. You can make such a threshold yourself using a pine or oak.

how to make a threshold in the bathroom

Plastic thresholds are the most affordable. They are available in a variety of colors and sizes. They are inexpensive, but look attractive. These products have one drawback, which is expressed in the short life. Such thresholds must be replaced after a short period of time. The most thorough will be the concrete threshold, which will become a reliable obstacle to the flood. You can make such a threshold yourself by overlaying with a laminate or tile.

Dismantling the old threshold

If you want to build the threshold from scratch, but still in place the old product flaunts, it will be necessary to dismantle it. The threshold is a pretty solid construction. To disassemble it you will need:

  • a hacksaw;
  • a hammer;
  • a small crowbar.

You need to start work using a hacksaw. On the sides should cut out the material, breaking the middle part. This must be done as carefully as possible so as not to damage the door. Using the hammer and crowbar, you need to remove the remaining elements of the threshold.

Preparing to make the threshold

Before you make the threshold in the bathroom, you need to prepare everything you need, namely:

  • rule;
  • spatulas;
  • capacity;
  • level;
  • grinder;
  • punch.

A container will be needed to mix the glue. Spatulas should be serrated, rubber and ordinary. As for the perforator, a nozzle on porcelain tile should go to it. Before carrying out work, care must be taken to ensure that appropriate materials are available. Tile is cut into pieces. It is better to use porcelain tiles to design the threshold, matched to the color of the floor in the corridor or bathroom.

Then, according to the instructions, tile glue is closed. You should get a homogeneous mass in consistency, similar to liquid sour cream. The base of the threshold should be cleaned of dust and contaminants, and then treated with a primer. This completes the preparation.

The algorithm of the work

If you want to make a threshold in the bath, you will need to form the sides of the tree, and inside the resulting form you will need to pour cement mortar. The boards are wrapped with foil so that the screed does not stick to the wood. After pouring, the surface is leveled by the rule. Using the level, you need to adjust the height of the threshold. The screed should dry well. This may take several days. During this period, the cement slurry is wetted with water. This will prevent the formation of cracks.

After the concrete has dried, the boards must be removed. The plank is cleaned to make the surface as flat as possible. Now the structure is coated on all sides with a primer. On this we can assume that the threshold to the bathroom is ready. Then you can start finishing with porcelain stoneware.

Facing the threshold

Glue must be applied to the tile using a notched trowel. Products are applied to the surface and pressed. Using plastic crosses, the seams between the tiles should be aligned. You need to use a level so that the surface is smooth. After laying the material, the seams are wiped with the composition of the same tone as the tile. To do this, you can use a rubber spatula. The excess mixture should be removed with a sponge.

The resulting threshold in the bathroom must be checked for strength. This must be done by tapping. The sound should be the same across the entire plane. If voids are still found, the tile in these places may burst.

Installation of a wooden threshold

If you want to finish with the installation of the threshold in a short time, you should choose a wooden structure. But it should be remembered that it wears out quickly, so it will require frequent restoration or replacement. For the manufacture of a wooden threshold, it is necessary to choose wood of powerful varieties. Before installing a new product (if the old threshold is present), it should be reviewed for defects. If the damage is minor, restoration will be easier and cheaper. To do this, the coating is ground, and then covered with a layer of varnish and paint. You need to choose the color that the door itself has.

Recommendations of a specialist

If the old threshold for restoration is not subject to and needs to be replaced, it is removed using a good lever, which must be hammered under the surface of the threshold . When the structure rises above the floor, it should be freed from the fasteners, and then knocked out with a hammer. The threshold can be cut into several parts. Before installing a new product, you should be careful about garbage disposal. In the hardware store you can find a finished threshold that has already been sanded and painted. It will only need to be installed, having previously adjusted the size.

Fastening to the surface is carried out with nails. In order to exclude cracking, you must first make holes for the nails, and then attach the threshold. Staining and applying varnish is the final process. If there is a small gap between the door and the threshold, it is filled with moisture-proof sealant.

In conclusion

Without a threshold, the bathroom will not be safe during a flood in the apartment. If you want to protect property, then the threshold must be made.

source

Comments

Tips from iHow

do not miss new and useful recommendations from experts

NEW
  • DIY magnetic stirrer: description, required materials
  • A magnetic stirrer is necessary for those who like to do various chemical experiments. With the help of this device, various ideas can be translated ...

  • Valve expander. How to do it yourself
  • How to make a coil for an extension cord with your own hands at home?
  • How to reduce silicone phone case: practical tips
  • Homemade hiking: interesting ideas
  • shares